Skip to main content

Embossing With Stencils

Hello, welcome to my blog!

Today's card project focuses on heat embossing with stencils. Stencils are great for ink blending and are economical. Did you know you can also heat emboss with your stencils? I am showing an example of white heat embossing, but you could also ink blend your stencil then heat emboss with clear embossing powder, if you don't mind getting your embossing pad dirty. Some people have a clean embossing pad dedicated for embossing only, and another embossing pad that they use for different techniques that may get the pad dirty. Let's get started!!



To start, I cut a 4 1/4" x 5 1/2" white Neenah cardstock panel using my Tim Holtz Guillotine paper trimmer. I add Gina K. Designs Adhesive Dot Runner to the corners on the back side of my white card panel to temporarily hold it down onto my Tonic Studios Tim Holtz Glass Media Mat. Next, I prep my panel with my Anti Static powder bag. I then place my Gina K. Designs Water Droplets stencil over the top of my white panel and tape down to my Glass Mat using Purple Tape.


Using my Versamark embossing ink pad, I apply ink directly from the pad onto my stencil pressing straight down with enough pressure to apply the ink through the stencil. I make sure all open areas of my stencil are inked good, then carefully remove the stencil from my panel. Next, I add Gina K. Designs Detail White embossing powder and heat set with my Wagner heat tool.



Now it's time to add ink to my panel. Using my Life Changing Blender Brushes, I start with Soft Stone ink adding in random areas. Next, I use Ocean Mist, followed by Turquoise Sea ink and Blue Lagoon. When adding each color, I blend into the previous color a bit. After all of the colors, I go back with Soft Stone to blend into the neighboring blues.






I cut my inked panel down to be 3 3/4" x 5". Next, I need to cut out a portion for my greeting to fit. I cut my top portion to be 2 1/2" long and the lower portion to be 1 3/4" long, leaving a 3/4" open area for my greeting.


I cut Fun Foam to be 2 1/4" x 3 1/2" for the top of my panel and 1 1/2" x 3 1/2" for the bottom portion of my panel. I adhere to my panel pieces using Gina K. Connect liquid glue. I like using fun foam instead of foam tape for larger pieces of cardstock as it gives a finished look and gives even dimension. I now take a 3 3/4" x 5" white cardstock panel to stamp my greeting onto. I set the white panel into my MISTI stamp positioner, then set the top and bottom panel pieces where they need to be so that I can line up my greeting. Once the greeting is lined up, I carefully remove the panel pieces and close the door of my MISTI to pick up the stamp. I stamp my greeting from Gina K. Designs Wealth Of Wishes using Gina K. Designs Amalgam Jet Black ink.




Next, I adhere my white panel onto a 3 7/8" x 5 1/8" Gina K. Designs Stormy Sky cardstock panel. Using liquid glue, I attach my top and bottom embossed pieces over the greeting panel. Once the glue is set, I mount onto a Gina K. Designs Turquoise Sea card panel and my card is complete.






I hope you enjoyed today's card project and learned a new way to use your stencils. Using metallic embossing powders on dark cardstock would give a beautiful, elegant look also.


If this is the first time visiting my blog, welcome and I hope you return. If you are a returning visitor, thank you so much for your support!

Should you have any questions or comments please leave them in the comments section. I'd love to hear from you and what you thought about today's card.

If you would like to be notified by email each time I post something new to my blog, you can click on the subscribe button at the top of the page.

Thank you for visiting and I hope you come back soon!


Happy Stamping!!

Jeannie

Comments

  1. You absolutely make beautiful cards. I love your blog. I love your cards Statement Flowers beautiful colors and stencils using Tim Holtz’s new Distress Ink Kitsch Flamingo. Thank for inspiring us!

    ReplyDelete
    Replies
    1. Thank you so much Chrissy for your kind words, I'm happy you enjoy my blog!! I love watercoloring and hope to create a card using it soon! The new Kitsch Flamingo is a beautiful color!

      Delete
  2. So while your adding the ink how do you get it just in the parts that aren't embossed? I'm very new to card making and about to buy embossing ink and powder and make stencils on my cricut, any advice is appreciated!!

    ReplyDelete
    Replies
    1. Thank you for visiting my blog!! After I heat emboss the stenciled design, I then blend the ink over the entire image. Because the design is embossed, it resists the ink so that the ink only blends onto the cardstock where there is no embossing. I hope this makes sense? Enjoy your card making journey... it is so much fun!! :)

      Delete
  3. I'm glad Jeannie asked that question. Also, does the Versa Mark wash of the stencil easily? I'm anxious to try this!!

    ReplyDelete
    Replies
    1. Use a little dish soap and water to clean the Versamark off the stencil, works great! Have fun!! :)

      Delete
  4. Love it and will use it on my next card.

    ReplyDelete
  5. Your cards are absolutely beautiful. I am very new to card making and have only used embossing over the whole card.

    ReplyDelete
    Replies
    1. Thank you so much for your kind words and welcome to the beautiful world of cardmaking!! I have card projects posted on my blog of many different techniques and styles, each with detailed instructions and photos. If you ever have any questions, I would be more than happy to help if I can. Happy crafting!!

      Delete
  6. Beautiful cards! Thank you for sharing your talents and instructions.
    I would love to sign up to receive notifications when you post but I don’t find where to do that.
    My e-mail is cavonins@comcast.net

    ReplyDelete
    Replies
    1. Thank you so much Carol!! I have a new blogging platform that allows subscribing by email. Please visit www.kampakreations.com to subscribe. All of my new projects will be on my new platform, and my past platform will remain up to show all of my past projects.

      Delete
  7. I’m new to card making and I loved this design and the way you did it. Thanks for sharing.

    ReplyDelete
  8. Thank you Chrissy, and welcome!!

    ReplyDelete
  9. Thanks for the visuals and the great idea! I am a seasoned card artist, loved this demo. Appreciated kindly.

    ReplyDelete
    Replies
    1. Thank you so much, Carol! I'm happy that you enjoyed my card.

      Delete

Post a Comment

Popular posts from this blog

Shadow Stamping With Stencils

Hello, welcome to my blog!! ***I wanted to let everyone know that Scrapbook.com has kicked off Freebie February!! Every couple of days they will be offering free items along with great sales! Check often as the sales will be frequently changing. I have placed a store logo on the front page of my blog just down below my profile that brings you directly to their store!    *I know die cut machines can be a bigger investment, but if you are in need of one and looking for a good price, Scrapbook.com has some really good prices on Big Shots -  stand alone  machines and bundles.   Today's card project is similar to yesterday's blog post using the shadow stamping technique, but today, I will be using a stencil. I will be using kraft cardstock as well as black cardstock. This is a fun technique to use on any color of cardstock. I wanted to show the look on a light colored cardstock vs a dark color. The key to using any color of cardstock is to first lay down white pigment ink follo

Love & Birthday Wishes - A Little Love Layering Stencils

  Hello, welcome to my blog!!  I want to start out by thanking everyone for the support and nice comments you all leave for me. I truly appreciate the support of this blog!! I enjoy card making and bringing my creations to you, this wouldn't be possible without your support, so again, thank you!! *Affiliate links are used at no additional cost to you. When you purchase products through my links I receive a small commission from these sales, thank you so much for your support, it is greatly appreciated!! For everyone that has been waiting for the A Little Love Layering Stencil Bundle - from Gina K. Designs, it is now back in stock!!! ***This "Love die" is also available for purchase on it's own! Love And Shadow Die Also back in stock are the Blending Brushes !! I used the stencil bundle to create today's card by doing simple blending and adding dimension with stacked die cuts. I love the many color combinations that can be used with this set! I love using gray to